FAQs

Spill Control Plug N Dike seals off gasoline, diesel, solvents and other chemicals. Plug N Dike seals immediately and sticks to dirty, crumpled surfaces even with the fluid flowing out. No surface preparation is required. It will plug up to three feet of head. Not recommended for some biofuels and some chemicals. Use the Biofuel BFADD Kits below for all fuels. Plug Dike Patch Plug N Dike is a nontoxic, nonflammable blend of high absorption polymers in a blended bentonite base that forms an immediate seal. It has been used for over 20 years by fire departments, transportation companies and industrial operations.

Plug The Leak Take a handful and apply it directly to the area leaking. These are ideal for including with spill response kits. This amount is usually sufficient for a gas or diesel tank leak. The containers shown are P-2, (10 oz) and 1-PMP (1-lb). Also available in 4 -lb and 8-lb containers. Not recommended for some biofuels. See Biofuel BFADD- below.

Dike or Plug the Spill Pour out a dike of the dry, granular Plug N Dike and spray the surface with water. It immediately seals off drains, curb inlets and culverts. The dry Plug N Dike can also be mixed with water to form a paste to plug leaks. Availabe sizes: 48P (48#/5-gal pail) or 10P (10#/1-gal jar).

Hydraulic Line Leak Control Absorb and contain oil leaks. Keep the area free of slippery oil and prevent burns if someone grabs the hose or fitting.Contain oil in a broken hose on field equipment to minimize the spill and clean-up required. Not intended to withstand operating pressure. Cleaner 99 was used to clean up the floor.

Plug Leaking Fuel Tanks Plug gasoline and diesel fuel tank leaks using the PP-T36 Kit. Plug N Dike immediately plugs the leak. Apply the butyl tape over it to provide a strong patch to get the truck back to the terminal. For biofuels and chemicals, use Plug N Dike with the BFADD-1 Kit below.

Plug Leaks/Spill Control for Biofuel/Chemicals Control leaking gasoline, diesel, biofuels and some chemicals. Wrap the barrier sheet around the Plug N Dike and force it into the hole. If you already have Plug N Dike, just order the BFADD-1 Kit. If you need to include Plug N Dike, BFADD-P-2 includes the Plug Pattie (10 oz) or BFADD-1-PMP includes the Premix (1-lb).

For Larger or Odd Size Drains The DC-1 is a 3-ft x 3-ft polyethylene mat with Plug N Dike edge seals. It seals off rough surfaces, even if wet and dirty. It can also be applied vertical to seal off both the catch basin and curb inlet. After use, clean off the mat for reuse with new edge sealants. Custom sizes are available.

Seal off Drains Plug Rugs will seal even if the surface is dirty and has cracks and gouges in the pavement. Just lay over drains, or in front of curb inlets to prevent the spill from entering. Available sizes are: 24R (24"x16"), 16R (16"x16") and 8R (8"x8").

Multiple Chemicals - No Probem This acrylic polymer will absorb just about all chemicals (acids, bases, reactives, solvents, drugs, bodily fluids). You only need one absorbent, which makes it much safer to use. Ideal for hospitals and labs.

Wood Plugs The wood plug set includes three cones: 2"x0.5", 3"x1", 4"x1.5" and one wedge 4" x 1.5" wide.

Epoxy Repair Kit This Leak Lock Repair Kit (LL15) contains both the Plug N Dike and the quick cure epoxy. The Plug N Dike stops the leak. Then the epoxy can be applied over the Plug N Dike to form a stronger repair.