These Spill Kits are designed for simple effective plugging and control of numerous leaking and spill situations. They will work for many hazardous chemicals.
PTL-3 INCIDENT RESPONSE AND SPILL KIT
Plug and control leaks ranging from crumpled areas with irregular holes to rips and valves. The foam is compressed and inserted into the hole. It will immediately expand, helping to seal off the leak. Some leaks may require using the wood cone/wedges, compressible foam and Plug N Dike. in the slits.
EFWP-22 SPILL AND LEAK CONTROL KIT
Plug fuel leaks, transformers, chemical containers and even some leaking pipes. This is a larger version of the PTL-3 Kit. More wood cones and compressible/expandable foam pieces are included. The foam will function from minus 40F to185F. Plug N Dike can also be added to the kit.
Wood Plug Set: Cones: 2" x 1/2" diam, 3" x 1", and 3 1/2" x 1 1/4"
Wedge: 3 1/2" x 1 1/2"
IBC Spill Control Kit
Plug punctured totes with a forklift hole or damaged corner.
Shove the butyl rubber into the hole using the wedge tool to hold back the pressure.
Slide the pressure bars between the butyl seal and the cage bars.
Use the wood plugs to apply pressure to those areas still leaking.
IBC-33 Spill Kit
Plugging the Leak
Leak Containment, LK-30
Slide under machinery, pipes or valves to catch leaks.
Flexible walls, polyethylene 30 inch diameter.
Can also be used for temporary storage of leaking parts.
These neoprene plugs will float, so they can be left in the drain basin during normal use. Seal the drain immediately by pressing them down into the drain.